Tag Archives: hemd

Achievement unlocked: completed embroidery!!

Thanks to a requirement that I rest with my feet up ( it’s not sell it’s cracked up to be) and crappy weather I knocked out the embroidery this week.

Per my previous posts I knew this would take less time because I had half the pleats to embroider than I did before. Thirty eight (38) rows around 1/2 hr to an hour each row. Started it last week, finished last night. Total time about 32 hrs pleating and embroidery.

Next: fitting the shirt

20131216-122008.jpg

Advertisements

Take Two!

In my last post I was woeing the need to rip out a horrific number of hours of embroidery because I was not happy with it.

So I did. Here is what happened next:
I put the shirt back up on the dress form to see how much fabric I could remove from the body without changing the drape ( about 10 inches front and back) .
I did 3 more test runs with pleat size.( decided on a larger pleat) .
Re-fit the shirt to my test dummy ( hubby).
Made sure I had enough thread in the same dye lot.
Put in Christmas movies and started pleating again.

This time, because there was less fabric and they were deeper, there are fewer pleats. This will actually be good because it pattern will be much more visible. The embroidery will also be easier because they will not be as tight. And I know the pattern now, so round two should be faster.

Two nights to re-pleat it and here is the result:

20131216-120905.jpg


When things just aren’t working out

We all know we are our own worst critics. But there are times that I feel that an artisan should to take a step back and say ” this is just not working” or ” it’s not right” or “not to my standards”.

Last week I hit that point. Fifty plus hours into the embroidery on the hemd and I knew.
The thread I had ordered was a slightly different shade of white than the first spool but it took about 6 rows of the pattern to really notice it ( and the subsequent stripe).

The neckline ( per my previous posts) was too big. I was going to change the style slightly and run with it.

BUT.. I knew it wasn’t right. While I am doing this project to further my research, it is going to someone else and I want them to love it. ( they would have no matter what because the recipient is too nice to say otherwise. ) Better to stop part way through than put more time into something I would ultimately be disappointed in.

My friend’s reactions, were sympathetic of course, then everyone of them more or less said that if I felt I needed to tear it out then it needed to be: their reason? I have standards that I set for myself. They are high, but they are there so I always challenge myself. Again we are our own worst critics.

So what is the next step? Well if it’s a technique that is not working, I will go back to the drawing board to see what I need to do differently. If it’s a material failure ( or worse) it may be a case of cutting my losses and start it over.

For the shirt it means tearing out all the embroidery done so far, and the pleating. Re-measuring, doing more test pleats and see if it can be salvaged.

This is all a good thing btw. I do thrive on proving to myself I can do it. More to come !!!